Cultivator points
Integral heat treatment, guarantee of long life
Characteristics:
•Boron steel.
•Hardness: 50 ± 2 HRc.
•Integral hardening to avoid deformations and rupture.
•Product uniformity guaranted by strict controls on quality and the production process.
Use:The cultivator points work parallel to the ground, cutting the roots and raising the plants, working to pull without upsetting the soil’s contour. The thin, long cultivator points cultivate by breaking the hardened soil and crushing clods.
1535
D Articles manufactured upon order
Fits in double coil tineFits in Chisel tine 1535 CN
F Articles manufactured upon order
Fits in double coil tineFits in Chisel tine 1537
F Articles manufactured upon order
Fits in double coil tineFits in Chisel tine 1537 CN
F Articles manufactured upon order
Fits in double coil tineFits in Chisel tine 1538
F Articles manufactured upon order
Fits in double coil tine 15035
D Articles manufactured upon order
Fits in S-tine 1576
F Articles manufactured upon order
Fits in double coil tine 1571
D Articles manufactured upon order
Fits in double coil tineFits in Chisel tineFits in stubble tine 1578
F Articles manufactured upon order
Fits in double coil tineFits in Chisel tine 1579
F Articles manufactured upon order
Fits in double coil tine 1572
D Articles manufactured upon order
15034
F Articles manufactured upon order
1577
F Articles manufactured upon order
Fits in Chisel tineFits in stubble tine 15106 CP
F Articles manufactured upon order
Fits in Vibro-Bellota tineFits in Chisel tineFits in double coil tine
1535-0 CA2
1535-A
1535-B C3A
Ref. | C | Grs. | A | B | C | A | B | E | M | D |
1535-A CA2 6 | 6 | 700 | 64 | 265 | 40-50 | 1000 | 1199A | M11 | 100 | |
1535-0 CA2 | 8 | 750 | 50 | 265 | 40-50 | 600 | 1199A | M11 | 100 | |
1535-F CA2 | 8 | 950 | 50 | 320 | 40-50 | 500 | 1199A | M11 | 100 | |
1535-A | 8 | 900 | 65 | 265 | 45 | 12 | 1080 | 1199A | M11 | |
1535-A-CP DURATOP | 12 | 700 | 50 | 180 | 43,7 | 1500 | 1199A | M12 | ||
1535-A CA2 12 | 8 | 900 | 65 | 265 | 40-50 | 12 | 1080 | 1199A | M11 | 100 |
1535-A CA2 CG | 8 | 900 | 65 | 265 | 40-50 | 900 | 1199A | M11 | 100 | |
1535-A CA3 CG | 8 | 900 | 64 | 265 | 35-60 | 900 | 1199A | M11 | 100 | |
1535-J CA2 CG | 8 | 1100 | 81 | 265 | 40-50 | 500 | 1199A | M11 | 100 | |
1535-G CA2 | 9,5 | 1550 | 65 | 320 | 40-50 | 500 | 1199A | M11 | 100 | |
1535-B | 10 | 1650 | 75 | 337 | 45 | 12 | 540 | 1199A | M12 | |
1535-B CA2 | 10 | 1650 | 75 | 337 | 40-50 | 12 | 540 | 1199A | M11 | |
1535-B C3A | 10 | 1650 | 75 | 337 | 45 / 45 | 12 | 540 | 1199A | M12 | |
1535-C | 10 | 2350 | 105 | 337 | 45 | 12 | 432 | 1199A | M12 | |
1535-C CA2 | 10 | 2350 | 105 | 337 | 40-50 | 300 | 1199A | M11 | 100 |
Fits in double coil tineFits in Chisel tine 1535 CN
1535-B-CN-C2A
1535-B CN CA1
1535-B-CN-C3A
Ref. | C | Grs. | A | B | C | A | B | E | M |
1535-B CN C2A | 13 | 1950 | 73 | 345 | 45 | 12 | 540 | 1199A | M12 |
1535-B CN CA1 | 13 | 1950 | 73 | 345 | 45-75 | 300 | 1199A | M12 | |
1535-B CN C3A | 13 | 1950 | 73 | 345 | 45 / 45 | 12 | 540 | 1199A | M12 |
Fits in double coil tineFits in Chisel tine 1537
1537
Ref. | C | Grs. | A | B | C | A | B | E | M |
1537-B CG | 13 | 2100 | 67 | 400 | 45 | 500 | 1199A | M12 |
Fits in double coil tineFits in Chisel tine 1537 CN
1537-C CN
Ref. | C | Grs. | A | B | C | A | B | E | M |
1537-B CN | 14,5 | 2700 | 68 | 370 | 45-60 | 6 | 324 | 1199A | M12 |
1537-C CN | 18 | 2700 | 71 | 405 | 45-60 | 6 | 330 | 1199A | M12 |
Fits in double coil tineFits in Chisel tine 1538
1538
Ref. | C | Grs. | A | B | C | A | B | E | M |
1538 | 8 | 600 | 50 | 260 | 45 | 12 | 1512 | 1199A | M10 |
Fits in double coil tine 15035
15035 CA10
Ref. | C | Grs. | A | B | C | B | E | M | D |
15035 CA | 7 | 950 | 52 | 300 | 45 | 800 | 1199O | M10 | |
15035 CA 10 | 10 | 1360 | 57 | 300 | 45 | 700 | 1199O | M10 | |
15035 C3A E10 | 10 | 1340 | 57 | 300 | 45 / 45 | 700 | 1199O | M10 | 100 |
Fits in S-tine 1576
1576
Ref. | C | Grs. | A | B | C | B | E | M |
1576 | 15 | 2200 | 55 | 375 | 45-75 | 300 | 1199A | M12 |
Fits in double coil tine 1571
1571-B C3A
1571-B CA2
1571-B CA
1571-C CA
Ref. | C | Grs. | A | B | C | A | B | E | M | D |
1571-A CA | 15 | 2700 | 70 | 400 | 60 | 6 | 324 | 1/2" | 100 | |
1571-B C3A | 20 | 2400 | 60 | 400 | 45 /45 | 6 | 324 | 1199A | M12 | |
1571-B CA | 20 | 2400 | 60 | 400 | 50-70 | 6 | 324 | 1199A | M12 | 100 |
1571-B CA2 | 20 | 2400 | 60 | 400 | 60 | 6 | 324 | 1199A | M12 | |
1571-C CA | 19 | 3400 | 80 | 400 | 45-75 | 6 | 270 | 1199A | M12 | |
1571-C CA1 | 19 | 3400 | 70 | 400 | 60 | 6 | 270 | 1/2" | 100 |
Fits in double coil tineFits in Chisel tineFits in stubble tine 1578
1578
Ref. | C | Grs. | A | B | C | B | E | M |
1578 | 12 | 2200 | 60 | 375 | 45-75 | 350 | 1199A | M12 |
Fits in double coil tineFits in Chisel tine 1579
1579
Ref. | C | Grs. | A | B | C | B | E | M |
1579 | 15 | 2300 | 55 | 375 | 35-70 | 350 | 1199A | M12 |
Fits in double coil tine 1572
1572-CA
Ref. | O. Ref. | C | Grs. | A | B | C | A | B | E | M | D |
1572 CA | KK303107 | 19 | 3400 | 70 | 422 | 60 | 12 | 324 | 1199C | M16 | 100 |
15034
15034
Ref. | G | C | Grs. | A | B | C | B | E | M |
15034 A 10 CA1 420 | 120x10 | 10 | 3500 | 120 | 420 | 45-80/45-80 | 200 | 1199A | M12 |
15034 B 12 CA1 420 | 100x12 | 12 | 3600 | 100 | 420 | 45-80/45-80 | 200 | 1199A | M12 |
15034 C 12 CA1 420 | 80x12 | 12 | 2950 | 80 | 420 | 45-80/45-80 | 250 | 1199A | M12 |
15034 A 12 CA1 450 | 120x12 | 12 | 4750 | 120 | 450 | 45-80/45-80 | 175 | 1199A | M12 |
15034 B 12 CA1 450 | 100x12 | 12 | 4000 | 100 | 450 | 45-80/45-80 | 200 | 1199A | M12 |
15034 B 12 CA1 480 | 100x12 | 12 | 4450 | 100 | 480 | 45-80/45-80 | 200 | 1199A | M12 |
15034 C 12 CA1 480 | 80x12 | 12 | 3600 | 80 | 480 | 45-80/45-80 | 200 | 1199A | M12 |
Also available with three holes with 70/70 inter-centres
1577 CA
1577-CA3
Ref. | C | Grs. | A | B | C | B | E | M |
1577 CA | 20 | 3200 | 135 | 453 | 70 | 125 | 1199A | M12 |
1577 CA1 | 20 | 3200 | 135 | 453 | 70 | 125 | 1199A | M14 |
1577 CA3 | 20 | 3200 | 135 | 453 | 45-75 | 125 | 1199A | M12 |
Fits in Chisel tineFits in stubble tine 15106 CP
15106 AP CP
15106 CP 10
Ref. | C | Grs. | A | B | C | B | E | M |
15106 AP CP DURATOP | 22 | 3385 | 60 | 365 | 40-80 | 240 | 1199A | M12 |
15106 AC CP: 2 tungsten carbide plates and wear-resistant welding
15106 CP 10: 10 tungsten carbide plates
Tables of reference
1429 LISTER POINT • 15027 (N) CONCORDE • 15028 (N) PELICAN • 15029 (N) • 15048 (N) • 15043 (N) • 15079 (N) FURROWER 15" • 15041 (B) • 15042 (B) • 15096 • 1583 • 15053 • 15023 • 15097 • 1551 • 1549 • 1550-A • 1535 • 1535 CN • 1537 • 1537 CN • 1538 • 15035 • 1576 • 1571 • 1578 • 1579 • 1572 • 15034 • 1577 • 15106 CP • 1553 • 1547 • 1511 • 15036 • 1593 • 1512 CN • 1513 • 1513 CN • 1574 • 15074 • 15046 • 15047 CN • 15049 CN • 15067 CN • 1561 • 15050 • 15051 • 15052 • 15070 • 15072 • 15077 • 15069 • 15028 CA1 PELICAN • 1500 • 1506 • 1507 • 1509 • 1510 • 1573 • 1501 • 1582 • 1581 • 1584 • 1585 • 15002 • 15003 • 15005
1429 LISTER POINT • 15027 (N) CONCORDE • 15028 (N) PELICAN • 15029 (N) • 15048 (N) • 15043 (N) • 15079 (N) FURROWER 15" • 15041 (B) • 15042 (B) • 15096 • 1583 • 15053 • 15023 • 15097 • 1551 • 1549 • 1550-A • 1535 • 1535 CN • 1537 • 1537 CN • 1538 • 15035 • 1576 • 1571 • 1578 • 1579 • 1572 • 15034 • 1577 • 15106 CP • 1553 • 1547 • 1511 • 15036 • 1593 • 1512 CN • 1513 • 1513 CN • 1574 • 15074 • 15046 • 15047 CN • 15049 CN • 15067 CN • 1561 • 15050 • 15051 • 15052 • 15070 • 15072 • 15077 • 15069 • 15028 CA1 PELICAN • 1500 • 1506 • 1507 • 1509 • 1510 • 1573 • 1501 • 1582 • 1581 • 1584 • 1585 • 15002 • 15003 • 15005