The increasing popularity of speed harrows

The full range of spare parts for speed harrows

Both in Europe and in North America the majority of agricultural machinery manufacturers supply speed harrows to adapt to the new tillage trends.

With speed harrows, each disc is housed in a hub that is fastened to the frame by separate tines. This system has different advantages in relation to the traditional harrow discs. Firstly, the speed harrows adapt very well to uneven ground seeing as each disc works independently from the rest. Furthermore the average working speed is faster than in the traditional disc harrows and if a disc breaks it is easier and faster to change in the speed harrows.

The speed harrows are lighter machines than the traditional disc harrows. This means that less power is required from the tractor when this farm machinery is used. The work done is shallower, about 5.15 cm deep. The discs that should be used on the speed harrows are low concavity discs with a flat centre, of between 18” and 24” in diameter.

Bellota has a wide range of agricultural spare parts for speed harrows. As well as the discs with different concavities, there are three different brackets available, all of them with a profile of 90x14. The model 2512 BRG A is mounted on the frame by means of a clamp. This Bellota model can be mounted on a frame of 60x60 and 70x70. The 2512 BRG A CA1 is fastened on to the bottom side of the frame using two bolts size 14. The model 2512 BRG B on the other hand is mounted on the front part of the frame using two bolts size 16. The three types of tine brackets can be fitted on with the hub mount at an angle of 90º or 19º depending on the work that is going to be done. Bellota sells the hubs separately in boxes that come with their corresponding kit of screws and bolts to fasten the disc onto the hub.

  2512 BRG A

  

2512 BRG A

12512KIT7070

12512

2512-SB

2512SB R

  

2512SB

2512SBR

Ref.ChasisGrs. GABCx1x2 QM B
2512 BRG A60X60 / 70x70900090X14273429264603040ºM12 (4)100
F Articles manufactured upon order

Assembly with clamp

Clamp for 60x60 chasis: 125126060 (M14). Clamp for 70x70 chasis: 125127070 (M14).

Can be assembled using the 2512-SB (ambidextrous and angled) and 2512-SB R (Straight) supports

Quality 12.9 bolts should be used.

  Clamps for 2512 BRG A

12512KIT7070

12512

Ref.Grs.ChasisM D
12512KIT 6060300060x60M12(2)/M14(1)
12512KIT 7070300070x70M12(2) /M14(1)
12512-6060110060x60100
12512-7070120070x70100
D Articles manufactured upon order

12512KIT7070: Robust and heat treated clamp. It stops the tine moving sideways in the frame.

12512KIT7070  2512 BRG A CA1

  

2512 BRG A CA1

2512-SB

2512SB R

  

2512SB

2512SBR

Ref.ChasisGrs. GABCx1x2 QM B
2512 BRG A CA160X60 / 70X70900090X14273429264603040ºM12 (4)100
F Articles manufactured upon order

Fixes to frame with 2 bolts of 14 mm metrics and 60 mm of distance between the two holes.

Can be assembled using the 2512-SB (ambidextrous and angled) and 2512-SB R (Straight) supports

Quality 12.9 bolts should be used.

  2512 BRG B

  

2512 BRG B

2512-SB

2512SB R

  

2512SB

2512SBR

Ref.ChasisGrs. GABCx1x2 QM B
2512 BRG B70x70760090X14265440267603048,6ºM12 (4)100
F Articles manufactured upon order

Fixes to frame with 2 bolts of 16 metrics and 50 mm of distance between the two holes.

Can be assembled using the 2512-SB (ambidextrous and angled) and 2512-SB R (Straight) supports

Quality 12.9 bolts should be used.

  2512 SB

2512-SB

2512SB

Ref.AngleGrs. B
2512 SB19º3500100
F Articles manufactured upon order

For BAA or HUB type bushes. Also can be tailor-made according to the requerement of each client.

Ambidextrous

Fixes to BRG tines with 4 bolts of 12 metrics, not included

We recommend to mount with flat center blades, models 1960, 1961 and 1965.

  2512 SB R

2512SB R

2512SBR

Ref.AngleGrs. B
2512 SB R90º3500100
F Articles manufactured upon order

Commom to all BRG tines

Ambidextrous

For BAA or HUB type bushes. Also can be tailor-made according to the requerement of each client.

Fixes to BRG tines with 4 bolts of 12 metrics, not included

  BUJEBRG30984

BUJEBRG30984

Ref.EDMNº Bolts EGrs. A B
BUJEBRG3098498117M12x1,25 (4)4M22x1,520001500
F Articles manufactured upon order

Painted black.

Assemble with support 2512SB (19º) and 2512SBR (90º).

Assembly with an 18"-20" disc is recommended. Recommended Bellota disc models: 1965, 1953, 1954, 1966, 1956, 1967, 1968, 1960, 1959, 1969, 1961, 1963, 1952, 1962 and 1958.

Mounting: 1 screw M22x1.5 (DIN 982)

Mounting: 6 bolts M12x1.25x25 (8.8) (ISO 8676)

  BUJEBRG30986

BUJEBRG30986

Ref.EDMNº Bolts EGrs. A B
BUJEBRG3098698117M12x1,25 (6)6M22x1,520001500
F Articles manufactured upon order

Zinc plated.

Assemble with support 2512SB (19º) and 2512SBR (90º).

Assembly with an 18"-20" disc is recommended. Recommended Bellota disc models: 1965, 1953, 1954, 1966, 1956, 1967, 1968, 1960, 1959, 1969, 1961, 1963, 1952, 1962 and 1958.

Mounting: 1 screw M22x1.5 (DIN 982)

Mounting: 6 bolts M12x1.25x25 (8.8) (ISO 8676)

 

Make a query

  • Data controller: Natt Tools Group Inc. (Venanpri Group)
  • Purpose of processing your personal data: deal with your request.
  • International data transfers: your data will be transferred to companies of the group that are located outside the EU.
  • Your rights: you are entitiled to access, rectify, cancel, object to, limit the processing of your data and transfer it.
  • Contact: dpd@bellota.com
Image CAPTCHA
Introduce the characters shown in the image

Aditional information

Download catalogue

Related videos

Disc Harrow

See more products